-
Added Battery measurement to my Zigbee F.A.R.T. Sensor
Whilst I waited for the arrival of my new PCBs from Aisler.net, I continued to work on the code for my Zigbee Sensor. Next item on my list was the addition of battery reporting. When running a device on battery, giving the user some idea of remaining battery life is… Read ⇢
-
My F.A.R.T. Sensor PCBs arrived today!
A quick look at v0.1 of my F.A.R.T. Sensor boards! Read ⇢
-
nRF52840 ADC Pin Mappings
I find myself struggling to remember the Analog to Digital converter PIN mappings on the nRF52840. To help, I created this simple table. This is for the aQFN73 variant, which comes on the Seeed XIAO nRF52840 I use the most. ADC PIN Name AIN0 A12 P0.02 AIN1 B13 P0.03 AIN2… Read ⇢
-
Switching my Temperature Sensor from BLE to Zigbee (Part #3)
In Part 3 of my series on making a Temperature sensor using Zigbee, I discuss issues with connectivity and finally getting good battery life. I run through some of the PCB design changes before talking about what is outstanding. Read ⇢
-
Lowering Matter device power consumption in ESP32-C6
Whilst I wait to take delivery of the PCBs for my Zigbee F.A.R.T. sensor project, I returned my attention to my Matter switch project. I had great success reducing the power consumption of my Zigbee sensor. I now wanted to see what I what was possible with the ESP32-C6. Sleep… Read ⇢
-
More successful adventures in reducing nRF52840 power consumption
As I get closer to finishing v0.1 of my Zigbee F.A.R.T. sensor, I continue to look at power consumption. This is my first post of 2025, so Happy New Year! I thought I was doing okay! My initial testing had the sensor sipping an average 400µA. Some more tinkering got… Read ⇢
-
Getting lower power consumption on the XIAO nRF52840
Following on the heels of the success with my nRF52840DK power consumption, I moved to my XIAO nRF52840 board. This was the board I wanted to run my Zigbee F.A.R.T, sensor on. I used the same arrangement as before, with the Nordic Power Profiler Kit (PPK) supplying 3.3v. I soldered… Read ⇢
-
Reducing power consumption in my nRF52840 Zigbee sensor with the help of a Nordic Semiconductors’ Power Profiler Kit
As part of tinkering on my Matter and Zigbee projects, I want to support battery power. Specifically, I want my Zigbee FART sensor to run for a few months on a battery. I’d love to box it up and hide away all the wires. My wife would love that too.… Read ⇢
-
Switching my Temperature Sensor from BLE to Zigbee (Part #2)
In Part #1, I started trying to convert my simple two probe temperature sensor from BLE to Zigbee. I got off to a slow start, dealing with compilation issues and incorrect behaviour. When I finished the previous post, I was waiting to hear back from Nordic’s support. I’m writing this… Read ⇢
@tomasmcguinness 